Specification

Medical cabin equipment

1.The interior of the medical cabin is made of ABS material, and has the functions of high surface hardness, smoothness, anti-bacterial, easy cleaning, disinfection, anti-aging, etc 2.A 7-inch high-definition touch LCD screen and emergency manual switch are installed on the front right side of the medical cabin. The waterproof film switch attachment screen is located on the left rear oxygen cabinet 3.A partition wall is installed between the driver's cabin and the medical cabin, which can completely separate the driver's cabin and the first aid cabin. The partition wall is made of ABS material using a one-time mold forming process. The middle partition wall is equipped with a movable transparent sliding window of no less than 0.2 square meters, and the sliding window glass is equipped with a locking device. 4.There is a shovel type stretcher compartment behind the partition wall of the medical cabin, and a folding seat with a safety belt is installed on the right side. 5.On the right side of the medical cabin, there is a bench seat and a forward facing doctor's seat. The bench seat is made of ABS material and can accommodate two people at the same time (with a seat belt and backrest). The space on both sides below the seat cushion can be used as a toolbox, and a maintenance hole for the middle door guide rail is reserved above the cabinet bed. Cabinet style bed cushions should be formed using a one-time mold process, with no splicing seams on the surface, and easy to rinse and disinfect. 6.The integrated inner top of the medical cabin integrates functions such as lighting, storage, ventilation, disinfection and sterilization, infusion stand, and all-round circular handrails according to actual operational requirements. 7.The design of the upper double-layer storage cabinet on the left side of the medical cabin, Install a set of medical equipment cabinets and operating platforms on the left side of the medical cabin. 8.An electrical pillar is installed in the middle of the left side of the medical cabin, which can be used to install oxygen. sockets for ventilators and humidification bottles 9.The medical cabin is equipped with a completely enclosed oxygen supply system 10.There is a cabinet located on the left rear of the medical cabin that can accommodate two 10L oxygen cylinders 11.The medical cabin floor is made of wear-resistant, acid resistant, alkali resistant, flame retardant, anti slip, mold resistant, and easy to clean medical plastic flooring.